Time-remaining display, Set the tape length – RCA CC643 User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Time-Remaining Display
The approximate time remaining on the tape in the camcorder for the tape speed
you have selected is automatically displayed in the viewfinder. Use the
T20*30»40
button to set the correct tape length before the camcorder can
correctly calculate time remaining.
, A
■i'-V
I
■ V
3 0 M I N
'V
2 9 M I N
3 M I N
2 M I N
(Flashing)
i
1 MIN
(Flashing)
i
3 0 M I N
S P
T 3 0
T A P E E N D
t
I
■‘V*'
yA ■
>;<
I
O M I N
(Flashing)
Set the Tape Length
1. Use the
SP-SLP
switch to select the
tape speed.
SP
or
SLP
appears in the
viewfinder.
2. Use the
T*20*30*40
button to select
the length of tape you are using.
• Select
T20
if you are using a tape
with 20 minutes or less
recording time.
• Select
T30
if you are using a tape
with 30 minutes recording time.
• Select
T40
if you are using a tape
with 40 minutes recording time.
The
time-remaining
indicator
will
start
flashing when the remaining tape time
reaches two minutes.
TAPE END
appears when the tape
reaches its end during recording or a
cassette is loaded whose tape is
already at its end.
I
52