Attach adapter/charger, Remove adapter/charger, Using an optional plug adapter – RCA CC643 User Manual
Page 14: Using the adapter/charger to power your camcorder
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The adapter/charger attaches to the camcorder and lets you power your camcorder
directly from standard household power. The adapter/charger operates on 100-240
volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the
camcorder or recharge the battery.
Using the Adapter/Charger to Power Your Camcorder
Attach Adapter/charger
1. Connect one end of the DC cable to
the DC OUT jack on the adapter/
charger.
2. Connect the other end of the DC cable
to the DC in jack on the camcorder as
shown above.
3. Plug the adapter/charger’s plug into
the nearest AC outlet (100-240V,
50/60HZ).
4. If the adapter/charger is properly
connected, its POWER indicator
will light.
CAUTION: Do not use this adapter/
charger for any other purpose other
than charging the FB1260 or FB120
battery pack or supplying power to the
camcorder.
Remove Adapter/Charger
1. Unplug the adapter/charger from the
wall outlet.
2. Remove the DC cable from the
adapter/charger and camcorder.
Using an Optional Plug Adapter
An optional plug adapter may be required
in some countries.
Optional AC
Plug Adapter
AC 100-240V
1. Plug the adapter/charger’s plug into
the AC plug adapter.
2. Plug the AC plug adapter into the AC
outlet.
12