RCA VG4038/ VG4039 - Manual (Page 8)

Hooking Up the VCR
Connecting IWo VCRs for Copying TEipes
Option A hookup.
Use this hookup for a simple connection
which requires fewer accessories.
1. Select a hookup from pages 2 through 5
and then modify with this connection.
2. Set the CHS CH4 switch on the playback
VCR to either channel 3 or 4.
You will tune the recording VCR to this channel
to receive'the signal from the playback VCR.
3. Connect as shown.
This connection may require additional
accessories not provided.
4. Plug in power cords of VCRs and TV.
5. Continue to page 7.
El
From Antenna, Cable
or Cable Box
RF Coàxial Cable
(supplied)
Playback
VCR
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
Recording
VCR
RF Coaxial
I Cable
Option B hookup.
Use this hookup for slightly improved copy
quality and more convenient operation —
use of TV»VCR button not required.
1. Select a hookup from pages 2 through 5
and then modify with this connection.
2. Connect as shown.
This connection requires additional accessories
not provided.
3. Plug in power cords of VCRs and TV.
4. Continue to page 7.
You will select the line (audio/video) input on
the recording VCR to receive the signal from
the playback VCR.
Caution: The unauthorized recording of
television programs and other materials
may infringe the rights of others.
w
From Antenna, Cable
or Cable Box
/■Ml——Ijjj
AudioA/ideo
Cables
Playback
VCR (only)
Recording
VCR
RF Coaxial
I
Use the hookup to the TV
as previously selected on
pages 3,4, or 5.