Buttons, Pause, Play – RCA VG4038/ VG4039 User Manual

Page 13: Rec'otr, Search, Slow a/t, Stop, Tracking t/a, Tv«vcr, Channela/t

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using the Remote Control

Buttons

VCR Function Buttons

(continued)

PAUSE

Pauses action for viewing during
playback.

Pauses recording to prevent
recording of unwanted scenes.

PLAY

Plays a tape.

PREV. CH.

(Previous Channel)

Switches between two channels.

Select one channel and then select
another. Press PREV CH to
switch between the two channels.

REC'OTR

Starts VCR recording.

Used for one touch recording
(OTR). See page 20.

REW

(Rewind)

Rewinds the tape when the VCR
is stopped.

Searches the picture in reverse
motion during playback.

SEARCH

Displays INDEX, TIME and GO
TO SEARCH menus on TV.

Advances tape 60 or 120 seconds
during playback.

SLOW

A / T

Used for slow-motion playback.

SPEED

(Tape Speed)

Selects a recording speed
(SP, LP, SLP).

STOP

Stops the normal functions such
as record, playback, rewind, fast
forward, and pause of the VCR.

TRACKING T/A

Lets you manually reduce the
streaks that may appear on the
picture during play or pause.

Reduces picture "jitter" during
stop-action playback.

TV«VCR

Switches the picture signal so
that it either comes from the VCR
or the TV channel. See page 9.

TV Function Buttons

Press the TV button to set remote to control a compatible TV. Some buttons may not work with the TV,

CHANNELA/T

Selects next higher or lower
channel in the TV's channel
memory when remote is set to
control a TV.

CLEAR

Removes menus or status
displays from the screen.

DISPLAY

Shows the status displays on the
screen.

Removes menus or displays from
the screen.

MUTE

Turns the TV sound on or off.

Numbers

(0 through 9)

Select a channel up to 99 by
pressing two numbers.

Select a cable channel over 99 by
pressing 100 arid then two
numbers.

Press the 100 button, then two
numbers to select a channel over
99.

Or, select a cable channel over 99
by pressing and holding 1 until

1 — appears on the screen. Then

press the other two numbers.

OFF

Turns off a compatible TV when
remote is set to control TV.

PREV. CH.

(Previous Channel)

Switches between two channels.

Select one channel and then select
another. Press PREV. CH. to
switch between the two channels.

VOLUME

A / T

Raises and lowers sound of TV.