RCA VG4038/ VG4039 - Manual (Page 22)

Recording a Program
One Touch Recording (OTR)
One touch recording lets you record up to four hours without using the timer program feature. The VCR
will turn off automatically at the end of the recording.
Operating Instructions
1. Turn on the VCR.
2. Insert a tape with safety tab in place.
3. Select the channel you want to record.
Select the desired recording speed using SPEED on the VCR or remote.
Press REC*OTR to activate recording.
Press REC«OTR repeatedly until the amount of recording time for the pro­
gram is displayed on the TV screen.
Each press of REC»OTR increases the time — 30 minutes up to 4 hours.
4.
5.
6.
RECORD LENGTH 1:00 -
CH 04
Press REC to set Length
Press
REC'OTR
Recording
Time
— 0:30
j
(30 Min)
1:00 (1 Hr)
1:30 (1 Hr, 30 Min)
2:00
j
(2Hrs)
3:00
j
(3Hrs)
4:00 (4Hrs)
0:00 (OTR Turns Off)
^ /ir
o
The amount of time the VCR will record and the
REC indicator appear in the VCR's display panel
(VG4039 only). Pressing REC»OTR displays the
time remaining on the TV screen. Pressing
REC*OTR again increases the amount of time.
Stopping a Recording in Progress
0®
With the VCR: Press POWER and then STOP
within a few seconds.
With the Remote: Press VCR1 (VCR2) and then
STOP within a few seconds.
5^
• ^
o
20