RCA VG4038/ VG4039 - Manual (Page 19)

Pliii/iiig n Tape
Using the Playback Features
Time Search
The VCR will search forward or reverse the amount of time you select from
the location you are on the tape.
1. Insert the prerecorded tape and press STOP.
2. Press SEARCH on the remote twice to display the TIME
SEARCH menu on the TV screen.
3. Press number buttons to enter the amount of time in hours and
minutes you want the VCR to search.
Press CLEAR on the remote to correct an entry.
4. Press F.FWD on the VCR or remote to search forward or REW
to search in reverse.
5. Press STOP to stop time searching.
TIME SEARCH
Enter xsearch time
Press FWD or REW
Press SEARCH to exit
Go-To Seapeh
The VCR will search for the time counter reading you select and
automatically begin playing back the tape.
1. Insert the prerecorded tape and press STOP.
2. Press SEARCH on the remote three times to display the
GO-TO SEARCH menu on the TV screen.
GO-TO SEARCH
Current tape counter is
0 : 00:00
Go to.c/5unter display
0:00:00
Press FWD or REW
Press SEARCH to exit
3. Press number buttons to enter the hour(s) and minute(s) of the
time counter reading you want the VCR to search.
Press CLEAR on the remote to correct an entry.
4. Press F.FWD to search forward or REW to search in reverse for
the time counter reading you entered.
5. Press STOP to stop go-to searching.
Commercial Scan (SEARCH Button)
This is useful for scanning commercials or short program segments.
1. Press SEARCH once during playback to advance
the tape approximately 60 seconds.
2. Press SEARCH twice during playback to advance the tape
approximately 120 seconds.
17