RCA VG4038/ VG4039 - Manual (Page 23)

Recording n Prognwi
Recording While You’re Away
Select Cable or Satellite Box Viewing Channel
(Required Only if All Channels Are Received From a Cabie or Sateiiite Box)
After you select the cable or satellite receiver box viewing channel, the VCR will automatically enter the output channel of your cable
or satellite box in the VCR PLUS+ and Timer Programming menus as the channel to be recorded. No VCR Flus+ setup is required
when you use a cable or satellite receiver box.
Operating Instructions
1. Press MENU» PROG on the remote to display the
VCR MAIN MENU on the TV screen.
2. Press 4 to display CHANNEL SETUP menu.
3. Press 4 to display Sat./Cable Box Setup menu.
4. Press 1 when the Sat./Cable Box Setup menu
appears.
5. Press two numbers on the remote to enter the output
channel of your cable or satellite box. Press 0 before
a single-digit number. For Example: Press 03 for
channel 3.
If you connected your cable or satellite box to the
VCR using the cable or satellite box's AUDIO/VIDEO
OUT jacks, press INPUT on the remote to select the
VIDEO IN option.
Press CLEAR to erase a number.
6. Press MENU»PROG when you are finished. A
message appears which will time out, or press
MENU»PROG to return to CHANNEL SETUP screen.
The VCR will now automatically enter the output
Channel of your cable or satellite box and CABLE as
the channel to be recorded in the VCR PLUS+ and
Timer Programming menus.
7. Exit the menu system by following directions at the
bottom of the screen.
VCR MAIN MENU
1 VCR PLUS+ Programming
2 Timer Programming
3 Review Programs
4 Channel Setup
CHANNEL SETUP
1 Auto-Search Channels
2 Add/Remove Channels
3 Tuning: CABLE
4 Sat./Cable Box Setup
Is a cable or satellite
box being used with the
VCR for all channels?
1 YeS/ continue
Enter the channel
number for viewing the
sat./cable box signal
'-li.
Press 01-13 or INPUT
Press NENU to exit
Your VC R wi 11 now
rece i ve all channels
from th e sa t. /cab 1 e
box on VCR CH 03
Pre s s MENU to exit
Turn on Iho cable box and tune it to the
channel you want
ti> record before time for
the recording to begin. ,
21