RCA VG4038/ VG4039 - Manual (Page 11)

Setting Up the VCR
Startup
7. Use TV*VCR button.
Skip this step if you used one of the advanced hookups.
When using one of the basic hookups, the TV«VCR button lets you
switch between the picture coming from the VCR or television
channels. This button allows you to record a program on the VCR
while watching another channel on the TV. Details are on page 18.
A. Press VCR1 to set the remote to control the VCR.
B. Press TV«VCR to see the picture from thé VCR.
The VCR indicator lights in the display panel.
C. Press CHANNEL up or down to change channels on the VCR.
The channel number changes on the TV screen.
D. Press TV«VCR to see the TV channels.
The VCR indicator does not light in the display panel. Change
channels using the TV's remote.
E. Return the TV to the VCR viewing channel — CH3 or CH4.
F. Press VCR1, then TV«VCR to switch back to the picture
from the VCR.
8. Set the time and date.
Important: Only model VG4039 is equipped with a clock on the
front display panel. Model VG4038's clock must be set using the
on-screen display.
When you first turn on the VG4039 VCR, — : — appears in the
clock area of the VCR's display panel.
VCR Display Panel (VG4039 only)
A. Press MENU«PROG on remote to see VCR MAIN MENU on the
TV screen.
B. Press 6 to display SET VCR CLOCK.
C. Enter the time and date with the number buttons on the
remote.
• Press 0 before single-digit numbers.
Example; press 0, then 5, then 0, then 7 for a time
of 5:07. Press 1 for AM or 2 for PM.
• Press CLEAR on the remote to change incorrect entries.
D. Press MENU«PROG to remove the SET VCR CLOCK menu
from the TV screen and start the clock.
E. Press 0 to exit the menu system.
The time will appear in the VCR's display panel for
VG4039 model and the time and date wiU appear on
the TV screen whenever you press DISPLAY.
VCR MAIN MENU
1 VCR PLUS+ Programming
2 Timer Programming
3 Review Programs
'A Channel Setup
5 VCR Setup Options
6 Set VCR Clock
SET VCR CLOCK
Time : —
(nh: mm)
Date —/ — /-
Press MENU to exit