RCA VG4038/ VG4039 - Manual (Page 27)

Recording a Program
Recording While You’re Away (Timer Recording)
Checking or Clearing VCR Plus+ and Timer Recordings
1. Press MENU«PROG on remote to display VCR
MAIN MENU on TV screen.
2. Press 3 for Review Programs.
Each entered program is displayed for a few
seconds in sequence.
3. Press MENU«PROG or 3 to display informa­
tion at a faster pace.
4. Press CLEAR on the remote when the program
you want to erase appears on the screen.
VCR MAIN MENU
1 VCR Plus+ Programming
2 Timer Programming
3 Review Programs
PROGRAM 1 - ONE TIME
Channel
Start Time
End Time
Start Date
Tape Speed
08 CABLE
02:10 PM
03:35 PM
11/18/94 Fri
SLP
Press CLEAR to delete
Press MENU for next prog
Timer Recording From the VCR’s Line Input
The line, input refers to the signal coming from the AUDIO
and VIDEO IN jacks of the VCR. Recording from the line
input is convenient if you have a satellite receiver or similar
component attached to these jacks. To timer record from the
component connected to the VCR's line input;
Press INPUT on the remote to enter VIDEO IN instead of tVie
channel number on the TV screen during timer
programming.
PROGRAM 1 - ONE TIME
Channel VIDEO IN
Start Time
End Time --j--
Start Date
Tape Speed SLP
Press CLEAR to correct
Press MENU to exit
25