Deleting a setup code, Checking a setup code – Kenwood 1070VR User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1D70VR/10BOVR (En
Л
L
. i Keys or controls used in this operation.
Deleting a setup code
O
Hold down the ElVT key until the backlight flashes twice.
6
Select the component to be deleted.
Press the VIDEO/ AUDIO, or TV key repeatedly to sefeul the
desired component.
© Enter the 3 digit code "991".
O Hold down the ENT key until the backlight flashes twice.
►At this time all inputs become available regardless of any earlier
registration
* Example i : To delete the registration ot the componerit connected to
the VIDEO 1 jacks, select "VIDEO 1
Perform each step within 5 seconds.
Checking a setup code
О
Hold down the ENT key until the backlight flashes twice.
© Select the component with setup code you want to check.
Press the VIDEO, AUDIO, or TV key repeatedly to select the
desired component.
© Enter the 3 digit code "990**.
О
Press the 1 key and count the number of times the backlight
blinks. This is the first number of the 4 digit setup code.
0 Press the 2 key and count the number of times the backlight
blinks. This is the second number of the 4 digit setup code.
0 Press the 3 key and со unt the nu mber of times the backi ight
blinks.
Thic is
the third number of the 4 digit setup code.
© Press the 4 key and count the number of times the backlight
blinks. This is the fourth number of the 4 digit setup code.
► The backlight flashes twice irnmediataly after the "0" io input to confirm
input.
• If the backlight does not blink, the first digit in the setup code is 0.
‘ If the backlight does not blink, the second digit in the setup code is 0.
»If the backlight doco not blink, the third digit in the oetup code is 0.
► If the backlight does not blink, the fourth digit in the setup code is 0.
Perform each step within 5 seconds.