Changing (confirming) the operation mode, Press shift, Go to step 2 within 3 seconds – Kenwood 1070VR User Manual
Page 34: Select the component to be controlled, Execute the desired operations
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
This operation ietsyou change the remote control operation
mode without changing the input eelector.
You may find this useful when you want to control one
component while using another. (For example, if you want
to rewind the tape deck while listening to a CD.)
This operation is also useful if you don't know the which
mode the remote control is set to. Executing this operation
allows you to change or reconfirm the operation mode you
desire.
107DVR/10BDVR (En/Kl
O O O
o~
I iSc£. i j
I © ^ e I'f
l<.eys or controls used m tnis operation.
Changing (confirming) the operation mode
Press SHIFT.
• To operate a TV, start from step S.
Go to step 2 within 3 seconds.
Select the component to be controlled.
Execute the desired operations.
T\
II
The component to be controlled is displayed in parenthesis
» Pressing any other keys after the
SHIFT
key cancels the shift function
iind $ends th* * nornnol code associated with the respective key.
*
The input selector does not change during this operation,
»If you press
VIDEO
or
AUDIO
key more than 3 seconds after pressing
the
SHIFT
key, the input selector changes together with the operation
mode.
• See "Remote operation of other components ' for a list of keys available
with each component.
The operation mode remains set at the component specified
in step 2.
To return control to the original component, press
SHIFT
and
then press the VIDEO or AUDIO key to return to the originoi
control mode.