Compaq SmartCore Express SMA200 - Manual (Page 2)

DIGITAL-LOGIC AG SMA200 Manual V1.0
2
For internal use only:
File: SMA200_TechManual_V1.0.doc
Path: R:\HANDBUCH\smart\SMA200\SMA200_TechManual_V1.0.doc
COPYRIGHT     2008 BY DIGITAL-LOGIC AG
This publication is protected by copyright and all rights are reserved. No part of this document may be
reproduced, transmitted, transcribed or stored in a retrieval system, in any form or by any means, electronic,
mechanical, optical, manual, or otherwise, without the prior written permission of DIGITAL-LOGIC AG.
The software described herein, together with this document, are furnished under a license agreement and
may be used or copied only in accordance with the terms of that agreement.
About this Manual and How to Use It
This manual is written for the original equipment manufacturer (OEM) who plans to build computer systems
based on the single board MICROSPACE-PC. It is for integrators and programmers of systems based on the
MICROSPACE-Computer family. This manual provides instructions for installing and configuring the board,
and describes the system and setup requirements. This document contains information on hardware
requirements, interconnections, and details of how to program the system. Please check the Product CD for
further information and manuals.
REVISION HISTORY:
Document
Version Date/Initials: Modification:
Remarks, News, Attention:
V0.1 07.2008 KUF Initial Version
V1.0 09.2008 WAS Details fine-tuned / Standard format w/Eng. applied
Attention!
1. All information in this manual, and the product, are subject to change without prior notice.
2. Read this manual prior to installation of the product.
3. Read the security information carefully prior to installation of the product.