Kenwood KR-V990D - Manual (Page 43)

■T l
ecifications (For U.S.A. and Canada
Rated power output during STEREO operation
120 watts per channel minimum RMS, both channels
driven, at 8 Q from 20 Hz to 20 kHz with no more than
0.03 % total harmonic distortion.(FTC)____________
Red power output during SURROUND operation
Front_____________________________________
105 watts per channel minimum RMS, both channels
driven, at 8 Q, 1kHz with no more than 0.7 % total
harmonic distortion.
Center
105 minimum RMS at 8 Q, 1 kHz with no more than 0.7
% total harmonic distortion.
Rear
70 watts per channel minimum RMS, both channels
driven, at 8 O, 1kHz with no more than 0.7 % total
harmonic distortion.____________________________
Total harmonic distortion............... 0.005%(1 kHz, SOW, 8 Q)
Frequency response
LINE(CD, AUX, TAPE)...... 10 Hz ~ 75 kHz, + 0 dB, -3 dB
Signal to noise ratio (IHF'66)
PHONO(MM).................................. ............................75 dB
LINE(CD, AUX, TAPE)...............................................98 dB
Input sensitivity / impedance
PHONO (MM)................ .............................2.5 mV / 47 kO
LINE(CD, AUX, TAPE)..............................200 mV / 47 kO
Output level / impedance
TAPE REC................................................ 200 mV / 2.2 kO
PRE OUT (FRONT, CENTER, REAR, SUBWOOFER)
................. .........................................................1 V/1 kO
^^me Control
BASS....................................................±10 dB (at 100 Hz)
TREBLE............................................. ±10 dB (at 10 kHz)
LOUDNESS control
VOLUME at -30 dB level....................... +8 dB (at 100 Hz)
FM tuner section
Tuning frequency range........................87,5 MHz 108 MHz
Usable sensitivity (MONO)
......... 1.2pV (75 i2)/ 13.2 dBf (75 kHz DEV., S/N 30 dB)
50dB quieting sensitivity
STEREO................. 32pV (75 O)/ 41.2 dBf (75 kHz DEV.)
Total harmonic distortion (1 kHz)
MONO .................. .........................0.6 % (65.2 dBf input)
STEREO.......................................... 0.7 % (65.2 dBf input)
Signal to noise ratio (1 kHz, 75 kHz DEV.)
MONO............................................. 75 dB (65.2 dBf input)
STEREO......................................... 68 dB (65.2 dBf input)
Selectivity (±400 kHz)...................................................... 50 dB
Stereo separation (1 kHz)...................................................... 40 dB
Frequency response..... ..... 30 Hz - 15kHz,+0.5 dB, -3.0 dB
AM tuner section
Tuning frequency range.........................530 kHz - 1.700 kHz
Usable sensitivity (30% mod., S/N 20 dB)
............... ....................................... 16 pV / (500 pV/m)
Total harmonic distortion.............. .................................0.7 %
Signal to noise ratio (30 % mod. 1 mV input)............... 45 dB
Selectivity......................................................................... 30 dB
GENERAL
Power consumption................................... ......................5.2 A
AC outlet
SWITCHED.............................2 (total 150 W, 1.2 A max.)
Dimensions...................................... W: 440 mm (17 - 5/16")
...................................................H :162 mm (6-3/8")
...................................................D :396 mm (15-9/16")
Weight (Net)................................................... 13.1 kg (28.9 lb)
DIGiTALAUDiO section
Sampling frequency .......................32 kHz, 44.1 kHz, 48 kHz
Input level / impedance
Coaxial (TV/CABLE)..................................0.5 Vp-p / 75 a
VIDEO section
TELEVISION format......................... ................................NTSC
VIDEO inputs / outputs
VIDEO (composite)...................................... 1 Vp-p / 75 ii
S-VIDEO (luminance signal)....................... 1 Vp-p / 75 O
(chrominance signal).......... 0.286 Vp-p / 75 Q
KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.