Kenwood KR-V990D - Manual (Page 32)

KR-vggoD (En)
DOLBY AC-3 can be used when playing LD software bearing the g]|«iu»YwwH^] mark and DOLBY AC-3 format digital broad­
casts (etc.). DOLBY PRO LOGIC and DOLBY 3 STEREO can be used when playing video or LD software bearing the
rmiDo^YsuHHouwDi mark.
DSP LOGIC can be used with any source. Be sure to complete "Surround set up" before using any of these surround modes.->[^
Preparations •Turn ON related components.
• Complete "Surround set up", -gft]
• Set the input to the component you
wish to play back with surround
sound.
, - - ^ -“r
Seiect the SOUND MENU.
O o o
MAIN MENU SOUND MENU
= CD SC
, PHONO
I tuner ffl
]TAPE1 Iffi
SC
VIDE01
VI0E02
VIDEOS
TVDCABLE
LD
1 L [ 1 Ò1 1 R 1 I stra U ht I
ESl ® Isf rm1
□TAPE2M0NIT0R
1 AUT() 1 1 l S: I I ssteh LI I 1
fMAiNi ES
I Select a surround mode.
Select the icon for the mode you desire. The selected icon turns blue.
Shows the speakers selected in
SURROUND SETUP
SOUND MENU
Qj cà '[a
---- as
tu ^ IM 1 STEREO 1
1 AUTO 1 1 l.n'nK: I 1 3 STEREO 1 1 H
fMlNl ^11
Midnight mode -QS)
AUTO
This mode selects the appropriate Dolby sur­
round mode automatically.
When a Dolby AC-3 format signal is input, the
surround mode switches to DOLBY AC-3.
Otherwise, the surround mode is set to DOLBY
PRO LOGIC. In some cases, depending on
the number of channels being input and the
type of speakers connected, the surround
mode may switch to DOLBY 3 STEREO.
DOLBY PRO LOGIC
Selects the DOLBY PRO LOGIC mode.
DOLBY 3 STEREO
Selects the DOLBY 3 STEREO mode.
DSP LOGIC
Turns on the current DSP LOGIC mode.
Press the blue triangle (displayed when DSP
LOGIC is turned on) to switch to the DSP
CONTROL screen and set the DSP LOGIC
mode and effect level.
LINE STRAIGHT
Lets you enjoy stereo playback with high
sound quality.
STEREO
Cancels surround playback.
I Start playing the video software.
Adjust the volume.
t When playing sources in the Dolby AC-3 surround mode, the sound being
played back may be interrupted until the receiver confirms that an AC-3
signal is being input (until the AC-3 indicator lights).
To enjoy Dolby AC-3 surround (as well as all the other surround modes) from a single component, be sure to use a Dolby AC-3 compatible source
component. Connect the Dolby AC-3 compatible source component's AC-3 format digital audio signal to the AC-3 INPUT terminal on the back
of the receiver. Connect the normal audio signal correctly to the respective component's AUDIO jacks.