Cuisinart DLC-10C User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Place metal blade over shaft,
matching outline O on top of
hub to shape of shaft. Lower blade
will almost touch bottom of bowl.
Place disc over shaft, matching
outline Q on its top to shape
of shaft.
Without touching blade edge, push
disc down as far as it will go.
Put cover on work bowl, with feed
tube at about 7 o'clock.
Turn cover counterclockwise until
it fits into position.
Put cover on bowl, feed tube
at 7 o'clock, and turn until it clicks.
Insert food in feed tube.
The pusher assembly slides over
the large feed tube. It has a large
pusher and a small pusher.
Push the small white pusher all
the way down and twist it to lock.
Push the large pusher all the way
down and push white Slide Lock
right to lock.
Twist small pusher to lock it and
push Slide Lock to left to unlock
pusher sleeve.
Slide large pusher sleeve over feed
tube and push all the way down
until labs click into place.