Canon DIGITAL VIDEO CAMCORDER MD130 - Manual (Page 73)

Connecting to a Printer
Ex
te
rn
al C
onne
ct
io
ns
73
Printing after Changing the Print Settings
1
Press .
• The print setting menu appears.
• Depending on the printer, the
message “BUSY.” may appear before
the camcorder displays the print
setting menu.
2
In the print settings menu, select
(
, ) the setting you want to
change and press ( ).
3
Select ( ) the desired setting
option and press ( ).
4 Select ( ) [PRINT] and press ( ).
• Printing starts. The print setting menu
disappears when the printing is
completed.
• To continue printing, select another
still image.
T
O CANCEL THE PRINTING
Press ( ) while printing. A confirmation dialog
appears. Select [OK] and press ( ). With
Canon’s PictBridge compatible printers, the
printing will stop immediately (even if not
completed) and the paper will be fed through.
P
RINTING ERRORS
If an error occurs during the printing process, an
error message appears (
80).
- Canon’s PictBridge compatible printers:
Resolve the error. When printing does not
resume automatically, select [CONTINUE] and
press (
). If [CONTINUE] cannot be selected,
select [STOP], press ( ) and retry printing.
Refer also to the printer’s instruction manual for
details.
- If the error still persists and printing does not
restart, disconnect the USB cable and turn off
the camcorder and the printer. After a short
while, turn them on again, set the camcorder to
mode and restore the connection.
W
HEN YOU HAVE FINISHED PRINTING
Disconnect the cable from the camcorder and
printer and turn off the camcorder.
IMPORTANT
The following still images may not be
correctly printed with a PictBridge compatible
printer.
- Images created or changed on a computer
and transferred to the memory card.
- Images recorded with the camcorder but
edited on a computer.
- Images whose file names were changed.
- Images not recorded with this camcorder.
Observe the following precautions during
printing:
- Do not turn off the camcorder or the printer.
- Do not change the position of the
/
switch.
- Do not disconnect the USB cable.
- Do not remove the memory card.
If the message “BUSY.” does not disappear,
disconnect the USB cable and restore the
connection after a short while.
P.SET