Canon DIGITAL VIDEO CAMCORDER MD130 - Manual (Page 21)

Getting Started
Pr
ep
ar
at
io
n
s
21
3
Adjust the viewfinder.
Keep the LCD panel closed to use the
viewfinder and adjust the dioptric
adjustment lever as necessary.
4
Fasten the grip belt.
Adjust the grip belt so that you can
reach the zoom lever with your index
finger, and the start/stop button with
your thumb.
The Wireless Controller
Inserting the Battery
(Lithium Button Battery CR2025)
1
Press the tab in the direction of the
arrow and pull out the battery
holder.
2
Place the lithium button battery with
the + side facing up.
3
Insert the battery holder.
Using the Wireless Controller
Point the controller at the camcorder’s
remote sensor when you press the
buttons.
NOTES
The wireless controller may not work properly
when the remote sensor is situated under
strong light sources or direct sunlight.
If the wireless controller does not work, check
that [WL.REMOTE] is not set to [OFF
]
( 41). Otherwise, replace the battery.
Adjusting the LCD Screen
Rotating the LCD Panel
Open the LCD panel 90 degrees.
You can rotate the panel 90 degrees
downward.
You can rotate the panel 180 degrees
toward the lens (allowing the subject to
monitor the LCD screen while you use the
viewfinder). Rotating the panel 180
degrees is also useful if you wish to
include yourself when recording with the
self timer.
Tab
180°
90°