Connecting to a tv or vcr – Canon DIGITAL VIDEO CAMCORDER MD130 User Manual
Page 62
Connecting to a TV or VCR
62
Terminal on the Camcorder
Connecting Cable
Terminal on the Connected
Device
2
Output connection (Signal Flow
) to an HDTV with a DV (IEEE1394) terminal.
Input connection (Signal Flow
) from a TV or other digital video
source with a DV (IEEE1394) output.
CV-150F/CV-250F
DV Cable (Optional)
4-pin
6-pin*
* Be careful to correctly insert the 6-pin plug into the DV terminal. Inserting it in the wrong direction
can result in damage to the camcorder.
3
Output connection (Signal Flow
) to a TV or VCR with a SCART terminal.
Input connection (Audio only, Signal flow
) from an analog source for audio
dubbing.
You will need to connect beforehand a commercially available SCART adapter to the
SCART terminal on the TV or VCR and then connect the STV-250N Stereo Video
Cable to the adapter.
In order to input audio for the audio dubbing function, you will require a
SCART adapter with input capability.
STV-250N Stereo Video Cable
(Supplied)
Yellow
White
Red
SCART Adapter
(Commercially available)