Brother FAX-195 - Manual (Page 23)

17
IV. USER-SELECTABLE SWITCH
The FAX-195 offers a number of user-selectable functions via the User Selectable Switches
which are initially programmed as 0000000 by the factory. Each of these digits is a "switch"
that controls a specific parameter of the facsimile machine.
Digits Parameters they control
Digit 1;
Digit 2:
Digits 3 and 4:
Digit 5:
Digit 6
Digit 7 The transmission speed
The presence or absence of audible tone
The resolution mode - NORMAL, FINE, PHOTO.
NOT USED
The presence or absence of end-of-page mark
The number of rings in the facsimile auto answer mode
The following table summarizes the digits, the items they control, the factory settings, the
optional settings and the new codes for the optional settings. Remember, the factory settings
are all Os!
Digit No. Item controlled Factory Set & Code Optional Setting & Code
1 G3 transmission speed 4800 bps (0) 2400 bps (1)
2 • Audible tone Present (0) Absent (1)
3 & 4 Resolution mode NORMAL (00) FINE (10)
PHOTO (grey scale) (11)
5 NOT USED
6 End-of-page mark Present (0) Absent (1)
7 Number of rings in auto­
answer mode 1 ring (0) 6 rings (1)
For example, when the factory selected for digits 3 and 4 the setting of 00, the FAX-195 will
automatically select the NORMAL mode as the "home position". However, if most of your
transmissions are of photographs, you may wish to change the "home position" to PHOTO (by
setting the digits 3 and 4 to 11.