Brother Fax-615 - Manual (Page 90)

All the reports and lists may be printed as follows;
1. Press FUNCTION.
2. Press 3.
3. Press the number of the level two
function you wish to print.
Example; l.ACT.REPORT.
4. Press START.
Activity Report Interval
liggjllilililiiiiiigl
iaiiiiiiiiiiiiigiii
iiliiiiiiiiiiiiiiijjM
liWBiiiiMgliiigiiiiili
An Activity Report can be printed at certain intervals that you specify. You can set the journal
period to “OFF” , “6 hours”, “12 hours”, “24 hours”, “2 days”, “4 days” or “7 days”. The Activity
Report will list all outgoing and incoming faxes {only the last 30) during that period. The factory
default setting is OFF.
After the Activity Report has printed at the preset inteiwal, the information will be deleted and
can not be recovered. However, at any time between these scheduled reports, you can manually
print the Activity Report and the information will remain.
NOTE: Ifyour Activity Report is not listing all your transactions, select a shorter interval period.
THE DISPLAY WILL SHOW;
1. Press FUNCTION.
2. Press 7.
3. Press 3.
4. Press (left arrow) or (right
arrow) to choose the setting.
Example: 12 HOURS.
Ifjnu select seven days, you should choose
the base day of the week.
5. Press SET.
6. Enter the time to print in 24-hour
format using the number keys.
Example; 19:45 (7:45P.M.).
7. Wait for two seconds.
8. Press STOP to exit.
C
iSliiMiiggiilMMiiH
tiigiiiiatiiiiiWiiii
liiiliiiilfliiliiiiiii
iaiiaifeiaiiiiigiM
ifiiiiaiiiiBiiiigiiiiB
lalgiiiiiliilggiiil ^
ililiiiiiiiiiillMliii
iOiiiiiMlMiiilBiWiillil
iiiiiiiiwaiiiiBiiiii
iigiitWiliilililliiifiii
10-2