Making а single copy, The display will show, Making a single copy -1 – Brother Fax-615 User Manual

Page 87

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Making а Single Copy

When you want to make a copy, make sure the text or image on the original document is not too
close to the edge. Your fax machine cannot read anything closer than 4 mm (1/8 inch) from the

edge.

You can select the resolution to either SUPERFINE or PHOTO. Set the resolution to either one.

If you do not set the resolution, the fax machine automatically makes a copy at SUPERFINE

resolution. For example, if your original is a photo, you may select PHOTO resolution. (To get
PHOTO resolution, press RESOLUTION repeatedly until both lights are lit.) You can also set

the resolution page by page using the 1. TEMP. SETTINGS function. (See page 6-12-13.)

Do not pull on the paper while copying is in progress. This may distort the copied image and
damage your machine.

These are the steps for making one copy each of your original documents:

1. Place the documents face down into

the fax machine.

2. Press

COPY.

3. Press

COPY,

again for a quicker

response. Or after 5 seconds, the

copying will start.

THE DISPLAY WILL SHOW:

iiiillllilliiliiaiPii

9-1