Brother Fax-615 - Manual (Page 42)

6. SENDING FAXES
A) DOCUMENT BASICS
The Size of Your Documents
216mm (8.5")
900mm
(35.4")
The size of the documents you want to send by fax should not be larger (or smaller) than your fax
machine can accommodate. The documents should each be between 148 and 216 mm (5.8 and 8.5
inches) wide and between 150 and 900 mm (5.9 and 35.4 inches) long.
The maximum width of the scanned area is 208 mm (8.2 inches), which can be printed on the
recording paper of the recipient’s fax.
How to Insert the Document
To send a fax, first insert the document you wish to send, face down, in the
document feeder. The top edge of the document should go in first, or the fax
will he received up side-down.
To prevent the document from going crooked as it is fed, adjust the paper
guides to fit the width of the document.
\1/
dOl
NOTICE
About the Documents You Send...
Do not use documents that are curled, wrinkled, folded, ripped, or that contain
staples, paper clips, paste, or tape. Also, do not use cardboard, newspaper, or fabric.
curled folded staples
wrinkled ripped paper clip
tape
6-i