Brother Fax-615 - Manual (Page 77)

lISriNCTIVE RINGING
6. Press STOP.
NOTE; The display should say
D/R SET MODE. Also, the
answer mode lights will
flash. You must now wait
for someone to call the
distinctive
ringing fax
number,
7. When the phone rings, listen care­
fully to check that the ringing pat­
tern is the one you want to register.
If it is, wait (at least two ring cy­
cles) until the display says
PICK
UP TO SET, Then pick up the fax
handset.
8. Press START to set.
Check that the display says
REGISTERED.
(If the other number was called,
press STOP to cancel.)
9. Hang up the handset.
штлйАмтйт
[- d T r s T t H
c 1 3
Иешвш|й1Ш11|Вй§щ
How to Тит the Distinctive Ringing Function ON or OFF
The distinctive ringing function is designed to accommodate the distinctive ringing service (a
telephone service that provides you with a multiple numbers, each with a distinctive ring pattern,
on one line). You can change the distinctive ringing function setting to ON or OFF as needed after
you have regi.stered the distinctive ringing number in the function called Setting the Distinctive
Ringing Function. To change the setting, repeat Steps 1-6; Step 4 is where you can select either
ON or OFF.
7-15