Brother Fax-615 - Manual (Page 34)

ItLhPHONE FUNCTION
FOR YOUR INFORMATION
Printing Page Headers
Your fax machine can print a page header on top of every document you send. It is
printed on the receiving party’s fax paper. It contains the date and time of
transmission, your fax number and name (Station ID), and page number. Of course
you need to register your Station ID beforehand for that information to be available.
Transmission Date and Time Station iD Page Number
09/12/1996 15:25 415555444d BROTHER PAGE 01
Helpful Hints 1. The telephone number that you store is used only for the Call Back Message
and the Cover Page features.
2. If you do not enter a fax number, no additional information can be entered.
3. When you enter a space, use (right arrow). Then it will be registered as a
blank space.
4. If Station ID has already been programmed, then after Step 3 the name will be
displayed with the prompt “1” to change “2” to exit. Press “1” if you need to
change any information. Pressing ‘^2” to exit will take you out of the function.
NOTICE
The Telephone Consumer Protection Act. of 1991 makes it unlawful for any person
to use a computer or electronic device to send any message via a telephone fax
machine unless such messages clearly contain in a margin at the top or bottom of
each transmitted page or on the first page of the transmission, the date and time it
is sent and an identification of the business or other entity, or other individual
sending the message and the telephone number of the sending machines or such
business, other entity, or individual.
In order to program this information into your fax machine, you should complete the
steps on the previous page.
Storing One-Touch Dial Numbers
You can dial numbers automatically by storing telephone or fax numbers as One-Touch dial
numbers. You can also store names with the numbers so that when you call, you can verify the
destination on the display. You can store a maximum of 10 phone numbers for FAX-615 and 20
numbers for FAX-625/635/675/715M/725M. To use 11 to 20 One-Touch number locations, you
need to press SHIFT. For example, One-Touch location “16” is accessed by pressing SHIFT+One-
Touch “06” simultaneously (See page 2-3). Here is how to store a telephone number as a One-
Touch dial number;
4-4