Brother Fax-615 - Manual (Page 23)

KEY
These function options will appear one after the other on the display. You can then choose one of
these options by pressing
SET when the option you want appears on the LCD.
You can also move through the function menu options at a faster rate by pressing (right
arrow). (See page 2-3 to locate this key on your Control Panel.) When you find the option you want,
press SET.
You can simply press the Level One Function number associated with each option (refer to pages
3-2 through 3-5).
Helpful Hints If you want to exit function mode, simply press STOP. Also, if you select the
wrong menu, and wish to return to the previous step, press CLEAR.
Alternating Displays for On-screen Programming (OSP)
Q ALTERNATE
:)
When you see alternating displays, the LCD will
usually alternate between the currently selected
option, and a help message giving brief instruc­
tions on how to proceed. The example shows the
current speaker volume is high and prompts you
to
use (left arrow) and (right arrow) to
change the setting, and then to press SET to store
it.
Function Selection Table
If you have a basic understanding of how to program a fax machine, you can perform most of the
programming settings without the owner's manual. To help you understand the function
selections, options, and settings that are found in your fax programs, we have the following
Function Selection Table.
Read through this table to gain a basic understanding of what your new fax model can do, and
then the next section will begin instructing you how to use on-screen programming.
Level one
function
Level two
function
Explanation of Options
Factory
setting
Page
1. TIMER
Use this for sending documents at a later
time.
— 6-7
1. TEMP.
(TEMPORARY)
SETTINGS
2. POLLING
Polling is the process of retrieving faxes
from another machine. You can also choose
if you want your polling secured.
STANDARD/SECURE
STAN­
DARD
8-1-5
3. CALL
RESERVE
You can send a fax and then talk to the
recipient using the CALL RESERVE func­
tion.
ON/OFF
OFF 6-18-19
3-2