Casio EX-P700 - Manual (Page 260)

APPENDIX
260
Display Messages
Alarm setting
complete.
Battery is low.
Cannot correct
image!
Can not find the file.
Cannot register any
more files.
Card ERROR
This message appears after you change the alarm
setting.
The battery is dead.
Keystone correction cannot be performed for some
reason. The image will be stored as-is, without
correction (page 121).
The camera cannot find an image specified by the
slideshow “Images” setting. Specify another image
(page 169).
• You are attempting to save a BESTSHOT user
setup when the “SCENE” folder already contains
999 setups (page 116).
• You are attempting to copy a FAVORITE file
when the “FAVORITE” folder already contains
9999 files (page 182).
Some problem occurred with the memory card.
Turn off the camera, and remove and then reinsert
the memory card. If the same message appears,
format the memory card (page 202).
IMPORTANT!
Formatting the memory card deletes all files on
the memory card. Before formatting, try
transferring recoverable files to a computer or
some other storage device.
Check connections!
File could not be
saved because
battery is low.
Folder cannot be
created.
LENS ERROR
Load paper!
Memory Full
No Favorites file!
Printing Error
You are trying to print on the printer over an
incompatible USB connection.
The battery is dead, so the recorded image could
not be saved.
This message appears when you try to record an
image while there are 9,999 files stored in the
999th folder. If you want to record more files,
delete files you no longer need (page 178).
If the lens comes into contact with some obstacle
while it is extending, this message appears, the
lens retracts, and the camera turns off. Take action
to remove the obstacle, and try turning on power
again.
The camera is in the Printer mode, and the printer
is out of paper.
Memory is full. If you want to record more files,
delete files you no longer need (page 178).
There is no FAVORITE file.
One of the following problems occurred during
printing.
• Printer power off
• Printer internal error