Casio EX-P700 - Manual (Page 177)

177
PLAYBACK
IMPORTANT!
• All icons and indicators that appear on the monitor
screen also appear on the TV screen.
• Note that the audio output is monaural.
• The camera’s monitor screen will go blank during
video output.
• Depending on the size of the TV screen, recorded
images and images during recording may not fill the
entire screen.
Selecting the Video Input System
You can select either NTSC or PAL for the video output
system to match the system of the TV you are using.
1. In a REC mode or the PLAY mode, press
[MENU].
2. Select the “Set Up” tab, select “Video Out”,
and then press [
̈].
3. Use [
̆] and [̄] to select the setting you
want, and then press [SET].
If you are using a TV designed
for use in this area:
U.S., Japan, and other areas
that use the NTSC system
Europe and other areas that
use the PAL system
Select this setting:
NTSC
PAL