beautypg.com

Mendinq, Darning, Liillilli iill – Kenmore 1660 User Manual

Page 40

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

MENDINQ

SETTINGS

Special Stitch Dial -

Stitch Width Control - 4
Stitch Length Control - Red Zone

Special Stitch Modifier - Red Dot

Zigzag Presser Foot
Zigzag Needle Plate

To repair a straight or three-cornered
tear, position the tear under the needle
in such a way that the stitching catches

both sides of the tear. When mending
a three-cornered tear, stitch from each

end to the center. It is well to use a
piece of fabric under the tear for re­

inforcement.

,..............................

liillilli

iill

DARNING

SETTINGS

Special Stitch Dial - i»|||

Stitch Width Control - Red Dot

Special Stitch Modifier - Red Dot

Feed Dogs - Up
No Presser Foot

Remove presser foot, stretch fabric be­

tween embroidery hoops with hole
centered. Draw the bobbin thread up

through the fabric by holding the top

thread and taking one stitch at the spot
where you wish to start darning.

Lowering the presser bar, start sewing

at a slow to medium speed. Move the
fabric back and forth with a steady
rhythm to cover the darning area.

When it is covered, turn the fabric and
sew another layer of stitching across

the first layer of stitching.

39

This manual is related to the following products: