Zipper application, Regular zipper, Invisible zipper – Kenmore 1660 User Manual
Page 39: Cording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Fig. 1
ZIPPER APPLICATION
SETTINGS
/
Special Stitch Dial -
Stitch Width Control - Red Dot
Stitch Length Control - 12 io 10
Special Stitch Modifier - Red Dot
Zipper Foot
■
Straight Stitch Needle Plate
REGULAR ZIPPER
The foot is adjustable for use on the
right or left side of the needle when
sewing the regular type of zipper.
Adjust the foot so the needle clears
the side notch on the foot. See Fig. 1.
Carefully follow directions given on
the zipper package.
INVISIBLE ZIPPER
Fig. 2
Adjust the foot so the needle is sewing
through the center hole of the foot and
one groove of the foot is riding on the
teeth of the zipper.
See Fig. 2. Follow the zipper manu
facturer’s Instructions.
After zipper has been inserted, finish
sewing seam by shifting foot to side
position sewing through side notch.
CORDING
Foot can also be used to make cording
for slipcovers etc. Cover a cord with
a strip of bias fabric and sew as shown
in Fig. 3.
Fig. 3
38