Presser feet – Kenmore 1660 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PRESSER FEET
To change the various presser feet,
raise the presser bar to Its highest
position by lifting the presser foot
lever. Loosen the presser foot thumb
screw, choose the proper foot, insert
from the from.
Tighten the screw using the large
screw driver to make certain the foot
is secure.
To aid you in the placement of heavy
fabrics under the presser foot, the lever
can raise the foot beyond the normal
”up'* position. This is also an aid In
changing your presser feet.
B
You have been given a variety of presser feet:
A. Zigzag Foot
B. Straight Stitch Foot
C. Satin Stitch Foot
D. Zipper Foot
21