Kenmore Washer/Dryer - Manual (Page 48)

END-OF-CYCLE SIGNAL CONTROL SOFT-HEAT®SYSTEM
for your
Benefit
for УОНГ
Benefit
Your dryer sounds a signal when
a drying cycle is finished.
The signal is helpful when you are drying
permanent press, synthetics, and other
items. These items should be removed
from the dryer as soon as it stops in
order to prevent wrinkles.
END OF CYCLE SIGNAL
SIGNAL SIGNAL
OFF • «ON
PUSHTO START DRYER BUTTON
Use this contFol to staFt the dryeF.
Be sure the dryer door is closed.
Opening the door stops the dryer. It
will not start again until you close the
door and press the PUSH TO START
DRYER Button. Be sure the Cycle
Selector Control (Timer) is still on a
dry setting.
SOFT-HEAT* System guards against
overdrying. This helps your fabrics
retain the natural moisture they neec
prevents static, and reduces pilling -
the formation of small lint-like balls
on the surface of garments. Pilling
is the natural result of washing and
wearing of garments.
Kenmore dryers help prevent overdryinr
so you get outstanding fabric care. In th
automatic drying and timed drying cycles
clothes are dried at the temperature yoL
selected until the last few minutes of thf
cycle. The dryer the n switches to low hea
COOL DOWN
Approximately ten minutes before the
end of the automatic drying and timed
drying cycles, clothes are tumbled with­
out heat to help reduce wrinkles and mak
clothes more comfortable to handle.
PUSH TO
START DRYER
END OF CYCLE SIGNAL
SIGNAL SIGNAL
OFF • «ON
48