Wire connection with frame-grounding conductor – Kenmore Washer/Dryer User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

STEP 5. Connect neutral grounding wire
and the neutral wire (white) of power
supply cord under the center screw of
terminal block.

STEP 6.

Connect the other two insulated

wires to outer terminal block screws.

STEP 7.

Connect the grounding wire

(green) of the power supply cord to the

external grounding conductor screw.
Securely tighten all electrical connections.

STEP 8.

Insert tab of teiminal block

cover into slot of the laundry center rear
panel. Secure cover with hold-down
screw.

Proceed with Installation on page 27.

Neutral
grounding wire
(green/yellow)

Green wire
of power supply
cord or bare ____
copper wire

Center silver-
colored terminal
block screw

External
ground
connector

Neutral wire
(white)

^4-inch, U.L.-listed,
strain relief

4-Wire Connection with

Frame-Grounding Conductor