B installing side shelf, side burner and tool, For lp gas grills – Kenmore 141.173373 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
B Installing Side Shelf, Side Burner and Tool
“ Holder Kit
Remove Side Burner from Side Burner Kit
before installing.
1.
Enlisting the aid of an assistant, attach Side Burner
Frame to right side of grill. Attach Side Shelf to
left side of grill as shown in Figure
8
a. Align
the 4 holes on Side Shelf and Side Burner Frame
with the threaded holes on left and right Bowl
Support Brackets. Tighten securely using 4 of the
1/4"x3/4" Pattern Head Screws provided.
2.
install the Side Burner Gas Valve Assembly to
the Side Burner Frame. See Figure
8
b. Attach
the Side Burner Gas Valve Assembly to the Side
Burner Gas Valve Hole on the Side Burner Frame,
as shown in Figure
8
b. Align the 2 holes on
the Side Burner Frame with the threaded holes
on the Side Burner Gas Valve Bracket. Tighten
securely using 2 of M4x8mm Pattern Head
Screws and
2
Washers.
3.
Cut Fastening Band from Side Burner Pot Support
and set Pot Support aside. Install the Side Burner
through the top hole in Side Burner Frame and
onto the Side Burner Gas Valve. Make sure that
opening at end of Side Burner Tube goes over
tip of Side Burner Gas Valve. Secure Side Burner
with supplied Cotter Pin. See Figure 8c or
Figure 8d. Place Pot Support into position on
Side Burner Frame.
4.
install the Control Knob to the Side Burner Gas
Valve Stem. See Figure 8c or Figure 8d.
5.
For LP Gas grills:
Connect the Electric Wire terminal from Side
Burner wth the other from Grill Head. Unscrew 1/
4"
X
2" Pattern Head Screw from Right Cart Leg
and fix Wire Plug "A" into Wire Fastener. Install
Wire Fastener to Right Cart Leg. Tighten securely
using the same screw. See Figure 8c.
Figure 8a
SIDE SHELF
Figure 8c (LP gas model only)