Self-cleaning, Stopping or interrupting a self-cleaning cycle, Press – Kenmore ELITE 790.467 User Manual
Page 37: Display, Instructions, To adjust the oven temperature higher, To adjust the oven temperature lower, On fin ou uu, N nn, Cd cd
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Self-Cleaning
INSTRUCTIONS
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle
due to excessive smoke or fire in the oven:
PRESS
1. Press
2. Once the oven has cooled down for approximafely 1 HOUR and
the DOOR LOCKED " icon is no longer displayed, the oven
door can then be opened (Figure 1).
Note: Self-Clean cycle can never be set to start more than 12 hours in advance.
DISPLAY
Figure 1
Adjusting Oven Temperature
The temperature in the oven has been pre-set at the factory. When first using the oven,
be sure to follow recipe times and temperatures. If you think the oven is cooking too hot
or too cool for the temperature you select, you can adjust the actual oven temperature
to be more or less than what is displayed. Before adjusting, test a recipe by using a
temperature setting that is higherorlowerthan the recommended temperature. The
baking results should help you to decide how much of an adjustment is needed.
PRESS
CD®
START J or
INSTRUCTIONS
To adjust the oven temperature higher
1. Press (Bake) for 6
SGConds
(Figure 2).
2. To increase the temperature use the number pads to enter the
desired change. (Example 30°F) CD) (Figure 3). The
temperature may be increased as much as 35°F (19°C).
3. Press r START to accept the temperature change and the display will
return to the time of day (Figure 4). Press to reject the
change if necessary.
To adjust the oven temperature lower
1. Press (Bake) for 6 seconds. 0° will appear in the display (Figure 5).
2. To decrease the temperature use the number pads to enter the
desired change. (Example -30°F)
CD CD
press
(Figure 6). The temperature may be decreased as much as 35“F
(19“C).
Note: The oven
temperature adjustments
made with this feature will
not change the Self-Clean
cycle temperature.
DISPLAY
Press START to accept the temperature change and the display will
return to the time of day (Figure 7). Press to reject the
change if necessary.
; START}
or
. on fin
OU UU
Figure 2
mm
Figure 3
Figure 4
9
n nn
u uu
Figures
/smÉìm
Figures
III
2i;
o
C
: ■
Figure?
37