Kenmore ELITE 790.467 - Manual (Page 20)

The BAKE (Bake) pad controls normal baking. If preheating is necessary, refer to the © Preheat Feature for
instructions. The oven can be programmed to bake at any temperature from 170° F to 550° F (the sample shown below is
for350°F).
INSTRUCTIONS PRESS DISPLAY
Setting Oven Controls
Setting Bake
To set the Bake Temperature to 375°F
1. Arrange interior oven racks and place food in oven.
2. Press
(Bake),
"350" will appearand "BAKE" will flash in the
display(Figure 1). If a bake of 350°F is needed, press " start \
3. Press (^2^ Cz) (Figure 2). "BAKE" will continue to flash
and "375°" will appearin the display.
4. Press . A beep will sound once the oven temperature
reaches 375° F and the display will show "375° " and " BAKE"
(Figures).
Pressing ( stop ) will cancel the Bake feature at any time.
To change the Bake Temperature (example: changing
from 375T to 425° F)
1. After the oven has already been set to bake at 375°F and the oven
temperature needs to be changed to 425°F, press (Bake) (Figure 4)
and "375" will appear and "BAKE" will flash in the display.
2. Press ((^4^ (Figure 5). "BAKE" will continue to flash
and "425°" will appear in the display.
3. Press START . "BAKE" and "425°" will stay in the display (See
Figures).
Note: During the first rise of temperature, the convection fan will be
activated to allow the oven to reach its target temperature faster. The
Bake, Broil and Convection elements will also cycle for a better heat
distribution.
CD® CD
f‘START">
.'
( Bake)
®®®
^7
start '';
:303S8'
Figure 1
:303“iS‘
Figure 2
:
30
:T
3
S^:S
Figures
■ 30 315
Figure 4
: 3 8 H 3 S :
Figure 5
' SC 'HS 5°
Figures
20