Consumer defined control features, Instructions, Press – Kenmore ELITE 790.467 User Manual
Page 18: Display, 38s5£3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Consumer Defined Control Features
Setting Temperature Display — Fahrenheit or Celsius:
The BROIL (Broil) and FLEX CLEAN pads control the Fahrenheit or Celsius temperature display modes. The oven
control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to
display in Fahrenheit.
INSTRUCTIONS
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius press (Broli'
(Figure 1 ) and hold f o r ? seconds; "550°" will appearand
"BROIL" will flash in the display and a beep will sound. If "F"
appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figures).
Press (^) to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Figure 2) or "C"
(Figures).
PRESS
DISPLAY
38S5£3
2
.
3.
Press CSTART :
change.
to accept the change or press (
stop
] to reject the
for7s6Conds
Figure 1
Figure 2
WMmmirnMi
(
start
)) Or^TO^
Figures
18