Cabletron Systems 150 - Manual (Page 85)

Small Office Remote Access Switch 85
IPX R OUTING N ETWORK
Configure IPX Routing: Masternet (Detroit)
C
ONFIGURE
IPX R
OUTING
: M
ASTERNET
(D
ETROIT
)
Using the detailed instructions provided in the Simple Remote Bridging chapter, use the CFGEDIT
program to configure Resources and Lines for the Detroit Master Network (masternet).
When complete, continue with the unique configuration elements for this IPX example. These
include:
•
configuring appropriate devices,
• configuring a Remote LAN Interface for the Orlando and Tampa sites, and
• configuring RIP and SAP to communicate with the Dallas router
C ONFIGURE D EVICES
First, we need to identify the devices to which masternet will connect. We need to configure an IPX
WAN device for the Dallas site, and we need to configure Remote LAN devices for the Tampa and
Orlando sites.
A DD IPX WAN D EVICE
Press 3 at the Security Menu, and the Device Level Database Menu will be displayed. To enable the
On-node Device Database, press 1 and follow the on-screen instructions.
To add the remote devices, press 2 (On-node Device entries). Press 1 to configure the information for
our first device, dallasnet. You will be prompted for the device name, followed by the Device Table
Menu:
After the new device name has been specified, a screen similar to the following is displayed.
This menu provides various configuration options for the device dallasnet. For purposes of our
example, we will provide the following ISDN and Authentication information.
Device Name? dallasnet
Device Table Menu: (Device = “dallasnet”)
1) ISDN
2) Frame Relay
3) X.25
4) Authentication
5) IP
6) IPX
7) AppleTalk
8) Bridging
9) POTS
10) Compression
Select function from above or for previous menu: