Cabletron Systems 150 - Manual (Page 72)

EXAMPLE NETWORKS
72 CyberSWITCH
We now need to enter the metric value for this route. The metric value is the administrative distance
to the destination of the entry. The administrative distance is typically measured by the number of
hop counts (number of routers) between the system and the destination, but it is up to you to assign
a proper value to each route entry. If multiple routes exist to the same destination, the route with
the least metric value will be chosen as its primary route. Care must be taken when assigning the
metric value of “0”, because it is interpreted that the destination is reachable directly and therefore
no intermediate router will be used. Press to accept the default metric value of 2.
Host #1
File Server
Internet
Router
LAN 1
128.1.1.8 128.1.1.3 128.1.1.7
LAN Interface 128.1.1.1
CSX150
CSX1200
Host #2
LAN 2
128.3.3.4 LAN Interface 128.3.3.1
ISDN
SITE1 needs static route
to SITE2
SITE1 needs default route
to SITE2
IP UnNumbered Interface for
SITE1 and SITE2
POWER SERVICE TX RX 10BASE - T LAN B-CHANNELS E1 ONLY
B2 B4 B6 B8 B26 B28 B22 B24 B18 B20 B14 B16 B10 B12 B30 L1
B1 B3 B5 B7 B25 B27 B21 B23 B17 B19 B13 B15 B9 B11 B29 B31 E1 D T1 D
"SITE1"
'SITE2"