Cabletron Systems 150 - Manual (Page 43)

Small Office Remote Access Switch 43
IP R OUTING N ETWORK
Configure the CyberSWITCH
The following screen will be displayed after all four devices in our example have been entered:
Return to the Security Configuration Menu.
C ONFIGURING THE U SER L EVEL D ATABASES
This network doesn’t require the use of a user level database. Therefore, no changes are necessary.
C ONFIGURING THE O FF - NODE S ERVER I NFORMATION
The default configuration for Off-node Server Information is None (Use On-node). Since this
network doesn’t require the use of an off-node server, no changes are necessary.
C ONFIGURING THE N ETWORK L OGIN I NFORMATION
This network doesn’t require the use of a user level database so network login information
configuration is not necessary.
S AVE C ONFIGURATION F ILES
We have now configured all the required information for this example. Press 4 from the Main menu
to save the changes. The old configuration files will be stored in the \CONFIG directory with a file
extension of .BAK (e.g., the old NODE.NEI file will be called NODE.BAK).
After you save the configuration files, press to exit the CFGEDIT program. Reboot the
system to activate your changes.
Current Device Table (Sorted by Device Name in Ascending ASCII Order)
id DEVICE NAME
-----------------------------
1 "Jill Smith"
2 "Rick Bear"
3 "Todd Jones"
4 "Ralph Moose"
(1) Add, (2) Change, (3) Delete, (4) Display a Device or press for previous
menu?