Cabletron Systems 150 - Manual (Page 75)

Small Office Remote Access Switch 75
IP R OUTING N ETWORK WITH PPP D EVICES
Verify the Installation
C ONFIGURING S TATIC R OUTES
To configure the static route information for SITE2, refer to the instructions provided for SITE1
(
page 71 ) with the following exceptions:
Static Route for SITE2:
•
Enter Y when asked if this static route is a default route.
• Enter SITE1 for the Next Hop name.
C ONFIGURING S ECURITY
C ONFIGURING S YSTEM O PTIONS AND I NFORMATION
Follow the instructions used for configuring the system information for SITE1 ( page 74 ) with the
following system information exceptions:
•
System Name: SITE2
• System Secret: ikcd98s
S AVE C ONFIGURATION F ILES
We have now configured all the required information for SITE2. Return to the Main Menu, save
your configuration files, and exit. Restart the SITE2 to activate the changes.
V ERIFY THE I NSTALLATION
Steps on how to verify the installation are detailed in the System Verification chapter of the User’s
Guide. This section gives an outline of which steps should be executed for Example 1.
On each system:
Verify resources are operational
Issue dr command
Look for WAN board initialized messages
Look for BRI line messages
Look for LAN initialization messages
Look for Bridge initialization messages
Verify WAN Lines Available
Connect WAN lines
Issue
dr command
Look for “Data Link up 1,1” in reports
On SITE1:
Check connectivity to local devices
IP PING 128.1.1.8 (host)
IP PING 128.1.1.3 (server)
IP PING 128.1.1.7 (router)
Check connectivity to SITE2
CALL DEVICE SITE2
Check connectivity to remote devices
IP PING 128.3.3.1 (SITE2)
IP PING 128.3.3.4 (host)