Zipper application, Regular zipper, Invisible zipper – Kenmore 1250 User Manual
Page 38: Cording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Page 14
ZIPPER APPLICATION
SETTINGS;-
Special Stitch Dial -
i*m
(Model 1250 only)
Special Stitch Variegator- Red mark on top
(Model 1250)
Red dot to the
left (Model 1240)
Stitch Width Control - Red Dot
Stitch Length Control - 10 to 12
Zipper Foot
REGULAR ZIPPER
The foot is adjustable for use on the
right or left side of the needle when
sewing the regular type of zipper. Adjust
the foot so the needle clears the side
notch on the foot. See Fig. 1. Carefully
follow directions given on the zipper
package.
INVISIBLE ZIPPER
Adjust the foot so the needle is sewing
through the center hole of the foot af'd
one groove of the foot is
rl i-r-g
on
t
teeth of the zipper. See Fig. ¿. Follovw
the zipper manufacturer's instructions.
After zipper has been inserted, finish
sewing seam by shifting foot to side
position sewing through side notch.
CORDING
Foot can also be used to make cording
for slipcovers etc. Cover a cord with a
strip of bias fabric and sew as shown in
Fig. 3.