Kenmore 1250 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The stitch length control regulates the length of the stitch you select. THE
HIGHER THE NUMBER-THE SHORTER THE STITCH.
The stitch setting you use will be determined by the thickness of the fabric you
are sewing. A longer stitch setting should be used for thicker fabric or more
layers of fabric.
The middle range of the control is the 10-12 stitch per inch range which Is the
most commonly used.
The basting and stretch stitch are made by adjusting the lever to make the
longest possible stitch. When adjusting for shorter stitches, select the stitch
length and tighten the knob In the center of the lever handle to remain at the
same setting. The knob must be loosened to readjust the lever.