Feet – Kenmore 1250 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PRESSER
FEET
Thé various presser feet that come with
your Kenmore Sewing Machine are
designed to help you to do every kind of
sewing easily and perfectly.
To change the presser foot:
1.
Raise the needle to its highest
position
by
turning
hand
wheel
towards you.
2.
Raise the presser bar to its highest
position by lifting the presser foot
lever.
3.
Loosen the presser foot screw. (You
do not need to remove the screw)
4.
Choose the proper foot. Insert from
the front.
5.
Tighten the screw using the large
screwdriver to make certain the foot
is secure.
D
You have been given a variety of presser feet:
A. Zigzag Stitch Foot
B. Satin Stitch Foot
C. Straight Stitch Foot
D. Zipper Foot