Needles, Accessories, Flacef^ent of needle – Kenmore 1250 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ACCESSORIES
Section
Page 20
l i t
Tr”!
Fig. 1
NEEDLES
Use KENMORE needles. The size of the
needle should conform with the size of
the thread and both should be suitable
to the fabric (See next page).
Never use a bent needle or one with a
blunt point.
Fig. 1. shows you the exact length of
your needle. Be sure you never use one
in your machine that is not this exact
length.
You will find among your accessories a
"Q NEEDLE"- with blue shank. This
special needle is to be used when
sewing
knits
and
certain
difficult
synthetic fabrics. If you experience
skipped stitches in any of your sewing,
use "Q
nkedlf
:”.» .
FLACEf^ENT OF NEEDLE
Raise needle bar to its highest position
by turning the hand wheel toward you.
Loosen the needle clamp screw. Hold
ing the needle with the flat side away
from you, slip the needle into the needle
bar. When it is in as far as it will go,
tighten the needle clamp screw with
screwdriver provided in the accessory
kit.