Clarity INT9 - Manual (Page 24)

4 Using the INT9 card Clarity Hardware
4.3 Digital Inputs and Outputs
The INT9 A/D converter contains eight digital TTL outputs, where the first
four are also designed as relay contacts.
Fig 15: Digital Outputs of INT9
These outputs can be controlled from the following places in Clarity:
l
Standard assignment of external Ext. Start Dig. Input and Ready Dig.
Output can be changed in the
System Configuration dialog - in the Fig 4
on pg 8.
Note: The assigned input and output is then automatically used in the ACTIVE
sequence for synchronization with the autosampler.
l
Digital outputs of INT9 dialog.
l
Device Monitor of the INT9.
l
In the Method Setup - Event Table dialog.
- 20 -