Clarity INT9 - Manual (Page 17)

INT9 A/D converter 4 Using the INT9 card
4 Using the INT9 card
There are generally two places for setting the parameters of the INT9 A/D
converter in Clarity:
l
The DataApex INT9 Setup dialog for setting the parameters that are set
with respect to the type of connected signal.
l
The Method Setup - Acquisition tab for setting the parameters related to
the type of analysis.
4.1 DataApex INT9 Setup
The DataApex INT9 Setup dialog sets the parameters of the INT9
converter and since it depends on the type of connected detector, it is not
going to be changed often.
Fig 9: DataApex INT9 Setup
Number of Channels
Indicates the number of data acquisition channels.
- 13 -