Cleaning and oiling – Kenmore 1206 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CLEANING AND OILING.......................
Keep the moving parts free from dust aad threads for quiet and efficient operation.
Cleaning
be done with a small brash, never with a sharp or pointed tool. When
mflchme runs hard or makes excessive noise, place a drop of KENMOHE sewing
machine oil at the points indicated by arrows.
To oil top of the machine, place a few drops of oil through the holes on the top cover
plate whie the needle is at the lowest point, or remove top cover plate by unscrewing
two screws and oU at the points indicat^ by arrows. (Model 1206)
TUt machiriA head back to oil points indicated on underside of machine head.
y
22