Kenmore 1206 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
When stitching is unsatisfactory as in figures
2 and 3, adjust the upper thread tension.
Lower thread tension requires adjustment
less frequently than the upper thread
tension.
When stitch is satisfactory, as in Fipre I and
seam is badly puckered, the cause may be
tight tensions and both upper and lower
may be adjusted. (See page 26)
When adjusting the tension on the bobbin
case, make slight adjustments with a screw
driver. (See page 26)
INCREASE TENSION
This manual is related to the following products: