Overcasting – Kenmore 1206 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
L Turn feed dog control to left. Place needle into left hole of button,
align holes with slot of presser foot and lower presser foot,
2,
Set stitch width control at width between holes of button. Test
width by turning handwheel slowly. Take several zigzag stitches to
sew on button, ending with needle on left side.
3. Set stitch width control at 0. Take a few stitches in left hole of
button to lock threads.
Pull threads to wrona side.
NOTE: To make a small thread shank when sewing on a flat button,
place a straight pm or needle between the holes of the button.
OVERCASTING
Set stitch width to 5. Set stitch length at 5, Zigzag stitch around raw
edge of fabric to completely cover the edge.
21