Turning a corner, Feed dog control, Changing the presser feet – Kenmore 1206 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TURNING A CORNER
Stop your sewing machine and make sure needle ts in
fabric. Raise presser foot. Turn fabnc to de.sired direc
tion. Lower presser foot and go on with your stitching.
FEED DOG CONTROL
This knob is situated on right front of machine bed.
When knob is turned to the left, feed dog docs not move
material. This allows the operator freedom of movement
of material. For regular sewing, turn knob to the right.
‘Ti’’ {Feed dog up).
CHANGING THE PRESSER FEET
The various presser feet available for certain kinds of
work are to be fastened to the presser bar.
To attach the foot, raise the presser bar to its highest
position by raising the presser foot lever.
Loosen the presser foot thumb screw, choose the proper
foot, insert from the front. Tighten the screw using the
large screwdriver and make sure that the foot is secure.
15